Tree Pruner& Pruning Saws

The tree pruner is a long hand pruners which is used to clipping the more higher tree’s branches. Tree pruner have two way to cut, one of them is use the pruner to trims branches, and another way is use saw to sawing the branch. They are used to trimming more thick branch of the tree.

PRODUCT TYPE

PRODUCT LIST

071N

Long Arm Cut & Hold Pruner

14 mm
0.53
kg
115 cm
FEATURE
  • Fully heated SK5 high carbon steel blade
  • PTFE non-stick coated blade for anti-rust and clean cutting
  • Light-weight alumin handle
  • Comfortable non-slip grips
071A

Telescopic Cut & Hold Pruner

14 mm
0.74
kg
115~ 165 cm
FEATURE
  • Fully heated SK5 high carbon steel blade
  • PTFE non-stick coated blade for anti-rust and clean cutting
  • Light-weight alumin handle
  • Comfortable non-slip grips
071A-L

Telescopic Cut & Hold Pruner

14 mm
1
kg
175~ 300 cm
FEATURE
  • Fully heated SK5 high carbon steel blade
  • PTFE non-stick coated blade for anti-rust and clean cutting
  • Light-weight alumin handle
  • Comfortable non-slip grips
50501

Gear Action Hook Anvil Tree Pruner (Nylon Set)

25 mm
0.64
kg
37 cm
FEATURE
  • Fully heated SK5 high carbon steel blade
  • PTFE non-stick coated blade for anti-rust and clean cutting
  • Available with telescopic pole
280

Gear Action Bypass Tree Pruner (Nylon Set)

25 mm
0.63
kg
37 cm
FEATURE
  • Fully heated S50C carbon steel blade
  • PTFE non-stick coated blade for anti-rust and clean cutting
  • Available with telescopic pole
285

Bypass Tree Pruner (Metal Set)

25 mm
0.63
kg
31 cm
FEATURE
  • Fully heated S50C carbon steel blade
  • PTFE non-stick coated blade for anti-rust and clean cutting
  • Available with telescopic pole
152C1i

Tree Pruner With Alumin-Diecasting Blade Holder

22 mm
1.67
kg
175~ 318 cm
FEATURE
  • Fully heated SK5 high carbon steel blade
  • PTFE non-stick coated blade for anti-rust and clean cutting
  • Available with telescopic pole
M350

3m Telescopic Metal Pole With Metal Holder (2 Stages)

1.03
kg
300 cm
FEATURE
  • Powder coating oval steel
  • FOR 152C1
O033

3.5m Telescopic Fiber Glass Pole With Metal Holder (2 Staes)

1.44
kg
350 cm
FEATURE
  • Red color painting
  • FOR 285
O035

3.5m Telescopic Fiber Glass Pole With Metal Holder (2 Staes)

1.15
kg
350 cm
FEATURE
  • Red color painting
  • FOR 50501.280

INSTRUCTION MANUAL

Careful Use

Do not twist the tool wile in use, it may damage the upper or lower blade, please see the instruction as below.

Pruning Cuts

Recommended Slope cut 45°angle, facing away from the bud to ensure water runs off, and would not damage the buds, please see the instruction as below.

1- Correct / 2- Too close to bud / 3 -Too much internode retained

Maintenance

In order to maintain the tools in good condition and shelf life, cleaning all the debris after use, apply oil on the blade and store in a dry area.

Safety Guidelines

  • Prevent eyes injury, wear eyes protection at work.
  • Prevent fingers injury, keep a distance and clear view while cutting the branches or vine.
  • Prevent foot injury, shoes or boots must be wear while doing pruning job.
  • Do not keep the tool inside the pocket, recommended to wear a scabbard.
  • Keep away from children, store the tool in the cupboard or higher ground.