Pruner
Pruning shears is a type of scissors for use on plants. Pruning Shears is used in trimming bonsai plant， compared with lopper and hedge shears; it is used in one hand. It used to prune hard branches of trees and shrubs up to two centimeters thick.
PRODUCT TYPE
PACKAGING
PRODUCT LIST
32001B
Bypass Pruner
14 mm
0.22
kg
20 cm
FEATURE
- Fully heated SK5 high carbon steel blade
- Hard chrome plating blade for rust resistance
- Die-casting aluminun handle
- Non-slip vinyl grips
33001B
Trimming Fruit Scissor
0.22
kg
21cm
FEATURE
- Fully heated SK5 high carbon steel blade
- Hard chrome plating blade for rust resistance
- Die-casting aluminun handle
- Non-slip vinyl grips
33007B
Multi Function Scissor
0.28
kg
21 cm
FEATURE
- Fully heated SK5 high carbon steel blade
- Hard chrome plating blade for rust resistance
- Die-casting aluminun handle
- Non-slip vinyl grips
320049
Bypass Pruner
14 mm
0.18
kg
18cm
FEATURE
- Fully heated SK5 high carbon steel blade
- PTFE non-stick coated blade for anti-rust and clean cutting
- Ergomomic hanldes
320059
Bypass Pruner
14 mm
0.21
kg
20cm
FEATURE
- Fully heated SK5 high carbon steel blade
- PTFE non-stick coated blade for anti-rust and clean cutting
- Ergomomic hanldes
320139
Bypass Pruner
16 mm
0.2
kg
20cm
FEATURE
- Fully heated SK5 high carbon steel blade
- PTFE non-stick coated blade for anti-rust and clean cutting
- Ergomomic hanldes
32009B
Bypass Pruner
12 mm
0.22
kg
20cm
FEATURE
- Fully heated SK5 high carbon steel blade
- PTFE non-stick coated blade for anti-rust and clean cutting
- Die-casting aluminun handle
- Non-slip vinyl grips
32010B
Bypass Pruner
15 mm
0.28
kg
21 cm
FEATURE
- Fully heated SK5 high carbon steel blade
- PTFE non-stick coated blade for anti-rust and clean cutting
- Die-casting aluminun handle
- Non-slip vinyl grips
32002Z
Bypass Pruner
16 mm
0.12
kg
17 cm
FEATURE
- Fully heated SK5 high carbon steel blade
- Black finish to avoid rust
- Metal handles
- Non-slip vinyl grips
33003Z
High Carbon Steel Straight Blade Snips
0.14
kg
19cm
FEATURE
- Fully heated SK5 high carbon steel blade
- Black finish to avoid rust
- Metal handles
- Non-slip vinyl grips
INSTRUCTION MANUAL
Careful Use
Do not twist the tool wile in use, it may damage the upper or lower blade, please see the instruction as below.
Pruning Cuts
Recommended Slope cut 45°angle, facing away from the bud to ensure water runs off, and would not damage the buds, please see the instruction as below.
1- Correct / 2- Too close to bud / 3 -Too much internode retained
Maintenance
In order to maintain the tools in good condition and shelf life, cleaning all the debris after use, apply oil on the blade and store in a dry area.
Safety Guidelines
- Prevent eyes injury, wear eyes protection at work.
- Prevent fingers injury, keep a distance and clear view while cutting the branches or vine.
- Prevent foot injury, shoes or boots must be wear while doing pruning job.
- Do not keep the tool inside the pocket, recommended to wear a scabbard.
- Keep away from children, store the tool in the cupboard or higher ground.
